copper slag used as a fine aggregate in concrete

Copper slag as fine aggregate for high performance concrete

Akihiko and Takashi investigated the use of slag from copper smelting as a fine aggregate in concrete. From mortar strength tests with a cement/slag/water ratio of Effect of copper slag as fine aggregate replacement in,Jan 01, 2019· Utilization of high volume Copper Slag (CS) in concrete is the aim of present work. This study leads towards cleaner production; by utilizing industrial waste i.e. CS. The objective of the present paper is to make High Strength Concrete (HSC) by utilizing CS as Fine Aggregate (F.A.). The work was carried in two phases.USE OF COPPER SLAG AS A REPLACEMENT FOR FINE AGGREGATE ,In this experiment a step is taken to reduce the use of fine aggregate in the concrete with copper slag. The fine aggregate is partially replaced with copper slag for 10%, 20%, 30%, 40% and 50%.

Concrete with Copper Slag Fine Aggregate

The copper slag has been used for cement material, sand blasting, reclamation and so on. However, most of the copper slag is stacked high as waste since the production exceeds demand. This study on the application of copper slag as fine aggregate for concrete has been started with the expectation of large amounts of consumption.Effects of Copper Slag as a Replacement for Fine Aggregate,Reinforced Concrete Slender Columns AS Alnuaimi Department of Civil and Architectural Engineering, Sultan Qaboos University, Al-Khoud, Muscat, Sultanate of Oman Received 6 March 2011; accepted 7 March 2012 Abstract: Use of copper slag (CS) as a replacement for fine aggregate (FA) in RC slender columns was experimen-tally investigated in this study.Ductile cementitious composite with copper slag as fine,Jan 01, 2020· Copper slag has been found to be a potential fine aggregate replacement material in high performance concrete. Mineral admixtures like Silica fume and Flyash class F obtained from North Madras thermal power was also used in order to improve

Study of the Properties of Concrete Containing Copper Slag

Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate . Srinivas C. H1*, S. M Muranal2 1Department of Civil Engineering, Rural Engineering College, Hulkoti-588205 . 2Department of Civil Engineering, Basaveshwar Engineering College, Bagalkot-587102 . Abstract Copper slag is one of the materials which is considered as waste materials in the production of copper,Use of copper slag as a replacement for fine aggregate in,The use of copper slag as a replacement for fine aggregate in construction will reduce damage to the environment due to the waste resulting from the copper manufacturing process and help in saving natural resources. In this research, the use of copper slag as a replacement for fine aggregate is investigated. Three slender reinforced concreteEffect of copper slag as fine aggregate replacement in,Jan 01, 2019· Utilization of high volume Copper Slag (CS) in concrete is the aim of present work. This study leads towards cleaner production; by utilizing industrial waste i.e. CS. The objective of the present paper is to make High Strength Concrete (HSC) by utilizing CS as Fine Aggregate (F.A.). The work was carried in two phases.

Concrete with copper slag fine aggregate — Okayama University

However, most of the copper slag is stacked high as waste since the production exceeds demand. This study on the application of copper slag as fine aggregate for concrete has been started with the expectation of large amounts of consumption. Many researchers have already found it possible to use a copper slag as a concrete aggregate.Concrete with Copper Slag Fine Aggregate,The copper slag has been used for cement material, sand blasting, reclamation and so on. However, most of the copper slag is stacked high as waste since the production exceeds demand. This study on the application of copper slag as fine aggregate for concrete has been started with the expectation of large amounts of consumption.Effects of Copper Slag as a Replacement for Fine Aggregate,Reinforced Concrete Slender Columns AS Alnuaimi Department of Civil and Architectural Engineering, Sultan Qaboos University, Al-Khoud, Muscat, Sultanate of Oman Received 6 March 2011; accepted 7 March 2012 Abstract: Use of copper slag (CS) as a replacement for fine aggregate (FA) in RC slender columns was experimen-tally investigated in this study.

Performance of Copper Slag as Fine Aggregate in High

Copper Slag as Fine Aggregate in High Strength Concrete”, Material Design, vol.31, No.6, pp.2878-2883, 2010. [6] R RChavan and D B KulkarniPaper on “Performance of Copper Slag on Strength Properties as Partial Replace of Fine Aggregate in Concrete Mix Design” International Journal of Advanced Engineering Research and Studies.(PDF) Partial Replacement of Copper Slag as Fine Aggregate,So as to abstain from utilizing common stream sand. An elective material is proposed to the quality of the solid by supplanting of fine total. Incompletely by squander material like copper slag which is an ecological waste. To make us of theseConcrete with Copper Slag Fine Aggregate. Request PDF,The use of copper slag in cement clinker production, and the effects of copper slag on the properties of Portland cement mortar and concrete in the form of cement replacement, coarse and fine

Study of the Properties of Concrete Containing Copper Slag

Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate . Srinivas C. H1*, S. M Muranal2 1Department of Civil Engineering, Rural Engineering College, Hulkoti-588205 . 2Department of Civil Engineering, Basaveshwar Engineering College, Bagalkot-587102 . Abstract Copper slag is one of the materials which is considered as waste materials in the production of copper,Use of copper slag as a replacement for fine aggregate in,The use of copper slag as a replacement for fine aggregate in construction will reduce damage to the environment due to the waste resulting from the copper manufacturing process and help in saving natural resources. In this research, the use of copper slag as a replacement for fine aggregate is investigated. Three slender reinforced concrete(PDF) Performance of Fly Ash and Copper Slag based,Oct 20, 2020· In this study, copper slag (CS) was used as a partial replacement of fine aggregate. Sand and CS were blended in different proportions (100:0, 80:20, 60:40 and 40:60) (sand:CS) by weight.

(PDF) Partial Replacement of Copper Slag as Fine Aggregate

Therefore, it is recommended that up to 40–50% (by weight of sand) of copper slag can be used as a replacement for fine aggregates in order to obtain a concrete with good strength and durabilityUse of copper slag as construction material in bituminous,Copper Slag (CS) is produced as waste from roasting of copper, in which sulphur (as SO 2) is eliminated. CS was used as fine aggregate (up to 30%) in the design of bituminous mixes like Bituminous Macadam, Dense Bituminous Macadam, Bituminous Concrete and Semi-Dense Bituminous Concrete.Study of the Properties of Concrete Containing Copper Slag,Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate . Srinivas C. H1*, S. M Muranal2 1Department of Civil Engineering, Rural Engineering College, Hulkoti-588205 . 2Department of Civil Engineering, Basaveshwar Engineering College, Bagalkot-587102 . Abstract Copper slag is one of the materials which is considered as waste materials in the production of copper,

Effect Of Copper Slag As A Fine Aggregate On Properties Of

1. To find the optimum proportion of Copper Slag that can be used as a replacement substitute material for fine aggregate in concrete 2.To evaluate mechanical properties by use of copper slag in concrete specimens. 3To determined Strength, Workability, Durability by using copper slag as fully replacement of fine aggregateEffects of Copper Slag as a Replacement for Fine Aggregate,Reinforced Concrete Slender Columns AS Alnuaimi Department of Civil and Architectural Engineering, Sultan Qaboos University, Al-Khoud, Muscat, Sultanate of Oman Received 6 March 2011; accepted 7 March 2012 Abstract: Use of copper slag (CS) as a replacement for fine aggregate (FA) in RC slender columns was experimen-tally investigated in this study.Use of copper slag as a replacement for fine aggregate in,The use of copper slag as a replacement for fine aggregate in construction will reduce damage to the environment due to the waste resulting from the copper manufacturing process and help in saving natural resources. In this research, the use of copper slag as a replacement for fine aggregate is investigated. Three slender reinforced concrete

Performance of Copper Slag as Fine Aggregate in High

Copper Slag as Fine Aggregate in High Strength Concrete”, Material Design, vol.31, No.6, pp.2878-2883, 2010. [6] R RChavan and D B KulkarniPaper on “Performance of Copper Slag on Strength Properties as Partial Replace of Fine Aggregate in Concrete Mix Design” International Journal of Advanced Engineering Research and Studies.Experimental Study on Concrete by Replacing Fine Aggregate,The chemical traces such as copper, sulphate and alumina present in the slag are not harmful. Copper slag is used in the concrete as one of the alternative materials. It is the waste product of copper from Sterlite Industries India Ltd, Tuticorin. The safe disposal of this waste is a lack, costly and causes environmental pollution.USE OF COPPER SLAG IN CONCRETE AND CEMENT MORTAR ,using copper slag as a replacement of fine aggregate on the strength properties. M25 grade concrete was used and tests were conducted for various proportions of copper slag replacement with sand of 0% to 100% in concrete. The test results indicate that compressive strength of concrete

pper slag used as a fine aggregate in ncrete

Use of copper slag in concrete industry as replacement of cement or/and fine aggregates can have the benefit of reducing the costs of disposal and minimising environmental pollution [1,2]. Little research work has been conducted to investigate the potential use of copper slag as fine aggregate on the properties of normal concrete.Mechanical Properties and Durability of Concrete with,of concrete with copper-slag fine aggregate, with few exceptions [e.g. 236,,25]. In the former two papers con-crete sand was partially replaced by copper slag and the water absorption, corrosion of reinforcement, chloride per-meability and acid and sulphate resistance of the resulting(PDF) Green Concrete with Basalt Fiber and Copper Slag: A,3) Substitution of fine aggregate by copper slag further than 30-50% leadto reducestrong point of concrete mix. 4) The substitution of fine aggregate by copper slag in concrete increase the split tensile strength by 30-36 %and compressive strength by 30-40%.

concrete final.edited.docx Introduction 1.0 Abstract

Copper slag can be utilized as fine aggregate in cement mortars, regular concrete, and total (coarse) in concrete (high strength). As fine aggregate in cement mortar. Copper slag provides good interlocking, leading to better volumetric and mechanical quality of different mixes.Use of waste copper slag, a sustainable material,May 03, 2014· Many researchers have investigated the use of copper slag in the production of cement, mortar, and concrete as mixed with lime stone powder, dust, cement replacement, use as partial replacement of coarse, and fine aggregates. The use of copper slag in cement and concrete provides potential environmental as well as economic benefits for allDurability of Concrete with Copper Slag Fine Aggregate,Many concrete engineers are eager to find fine aggregate sources other than the traditional river and sea sand. Copper slag fine aggregate is expected to be one of the alternatives although the location where the copper slag is available is limited. In this paper, some characteristics of concrete with copper slag will be clarified.